KeepGuard KG Series Instruction Book page 12

Settings
Interval
OK
Coordinate Input
Coordinate Input
OK
Time Period
OK
Interval
10s
Set Exit
MENU
ON
OFF
Set Exit
MENU
Time Period Set
ON
OFF
Set Exit
MENU
Selects the length of time that the camera will "wait"until
it responds to any additional triggers from the PIR after an
animal is first detected and remains within the sensor's range.
During this user set"ignore triggers"interval, the camera
will not capture photos/videos.This prevents the card from
filling up with too many redundant images.
Using the Setup Menu Input Screens"Allows user to input
latitude and longitude coordinates for camera's location.This
data will be embedded in files saved on camera's SD card.
Press OK and use UP/DOWN keys ( to change the setting ) and
LEFT/RIGHT keys ( to move to the next field ) to set time. Once
all settings are made, press OK to save.
Note: two time blocks can not appear overlap section, or you will not set
it successfully.
For example: A 8:00-12:00
KEEPTIME
12
B 13:00-23:00, this is OK for set.