Sony BRAVIA KDL-32V2000 Operating Instructions Manual page 34

Connecting to the TV (rear)
DVD recorder
VCR
Video game equipment
DVD player
Decoder
34
GB
PC
DVD player
Digital satellite receiver
DVD player
with component output
Hi-Fi
Decoder
To connect Do this
PC D
Connect to the PC
sockets. It is recommended to use
a PC cable with ferrites.
Digital satellite Connect to the HDMI IN 4 socket
receiver or DVD if the equipment has a HDMI
player E
socket. The digital video and audio
signals are input from the
equipment. If the equipment has a
DVI socket, connect the DVI
socket to the HDMI IN 4 socket
through a DVI - HDMI adaptor
interface (not supplied), and
connect the equipment's audio out
sockets to the audio in HDMI IN 4
sockets.
Note
The HDMI sockets only support the
following video inputs: 480i, 480p,
576i, 576p, 720p and 1080i. To
connect a PC, please use the PC input
socket.
DVD player with Connect to the component sockets
component output and the audio sockets
F
Video game Connect to the scart socket
equipment, DVD
player or decoder decoder, the scrambled signal from
G
the TV tuner is output to the
decoder, then the unscrambled
signal is output from the decoder.
DVD recorder or Connect to the scart socket
VCR that supports
SmartLink H
between the TV and a VCR/DVD
recorder.
Hi-Fi audio Connect to the audio output
equipment I
sockets
from the TV on Hi-Fi audio
equipment.
/
/
1. When you connect the
2. SmartLink is a direct link
to listen to the sound
3.
/
/