Philips AquaTouch S5000 series Manual page 42

Problem
The SmartClean
system does not
work when I
press the on/off
button.
The shaver
is not fully
charged after I
charge it in the
SmartClean
system.
I replaced
the shaving
heads, but the
replacement
reminder
symbol is still
showing.
A shaving
head symbol
had suddenly
appeared on the
display.
The nose
trimmer
attachment pulls
at the hairs.
Possible cause
The SmartClean
system is not
connected to the
mains.
You have not placed
the shaver in the
SmartClean system
properly.
You have not reset
the shaver.
This symbol is
a replacement
reminder.
You move the
appliance too fast.
Solution
Put the small plug in
SmartClean system and
put the adapter in the wall
socket.
Make sure you press the
shaver in the SmartClean
system until it locks into
place and press down the
top cap.
Reset the shaver by pressing
the on/off button for approx.
7 seconds (see chapter
'Replacement').
Replace the shaving heads
( see chapter 'Replacement' ).
Do not move the appliance
too fast.