Table of Contents
Advertisement
HDMI Set-up
Sound Offset
Manual Programme
Preset
This is used to set the HDMI control compatible equipment connected to the HDMI
sockets. Note that the interlock setting must also be made on the connected HDMI
control compatible equipment side.
"HDMI Control": This sets whether to interlock the HDMI control compatible
equipment and the TV. When set to "On", the following menu items can be
performed.
"Auto Devices Off": When this is set to "On", the HDMI control compatible
equipment turn on and off interlocked with the TV.
"Auto TV On": When this is set to "On", the TV turns on interlocked with the
HDMI control compatible equipment.
"Device List Update": Creates or updates the "HDMI Device List". Up to 11 HDMI
control compatible equipment can be connected, and up to 5 equipment can be
connected to a single socket. Be sure to update the "HDMI Device List" when you
change the HDMI control compatible equipment connections or settings.
"HDMI Device List": Displays the connected HDMI control compatible
equipments.
Sets an independent volume level to each equipment connected to the TV.
Before selecting "Label"/"AFT"/"Audio Filter"/"LNA"/"Skip"/"Decoder", press
F
f
/
to select the programme number you want to modify. Then, press
System
Presets programme channels manually.
1
F
f
Press
/
to select "System", then press
2
F
f
Press
/
to select one of the following TV broadcast systems, then
G
press
.
B/G: For western European countries/regions
D/K: For eastern European countries/regions
L: For France
I: For the United Kingdom
~
Depending on the country/region selected for "
available.
Channel
1
F
f
Press
/
to select "Channel", then press
2
F
f
Press
/
to select "S" (for cable channels) or "C" (for terrestrial
channels), then press
3
Tune the channels as follows:
If you do not know the channel number (frequency)
F
f
Press
/
to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or
your VCR channel number.
4
Press
to jump to "Confirm", then press
5
f
Press
to select "OK", then press
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
AFT
Allows you to fine-tune the selected programme number manually if you feel that a
slight tuning adjustment will improve the picture quality.
.
Country
" (page 5), this option may not be
.
g
.
F
f
/
.
.
.
.
27
GB
Hide quick links:
Advertisement
Table of Contents
