Before You Start To Play; Connecting The Ac Adaptor - Dexibell Classico L3 Quick Manual

4
POWER PORT

Before You Start to Play

Connecting the AC Adaptor

1.
PEDAL
Rotate the [VOLUME] knob toward the left position to
minimize the volume.
VOLUME
2.
Connect the included power cord to the AC adapter.
The indicator will light once you plug the AC adaptor into a wall
outlet.
To an AC outlet
Power cord
NOTE
Depending on your area, the included power cord may differ
from the one shown above.
NOTE
Be sure to use only the AC adaptor (DEXIBELL DYS602-240250W)
supplied with the unit. Also, make sure the line voltage at the
installation matches the input voltage specified on the AC
adapter body. Other AC adapters may use a different polarity, or
be designed for a different voltage, so their use could result in
damage, malfunction, or electric shock.
NOTE
If you won't be using the CLASSICO L3 for an extended period of
time, disconnect the power cord from the electrical outlet.
NOTE
To avoid malfunctions, never disconnect the AC/DC adapter
while the instrument is turned on.
3.
Connect the AC adaptor to the CLASSICO L3's DC IN jack
positioned to the rear bottom panel.
Installing Music Rest
Install the included music rest as shown in the illustration below.
5 VOLT
AC Adapter
Installing LED Lamp
CLASSICO L3 is equipped with a 5 Volt POWER PORT. When the light is not
enough to read music, you can connect the flexible USB LED lamp.
POWER PORT
5 VOLT
1.
Connect the flexible LED lamp to the POWER PORT.
NOTE
Carefully insert the LED lamp making sure that the connector on
the device is appropriate and that it is connected in the proper
PEDAL
direction.
WARNING
Do not connect any other devices to this power port. An
VOLUME
excessive current consumption can damage the instrument.
Ground Terminal
Depending on the circumstances of a particular setup, you could feel a
tingling sensation at the point where you touch this device.
You can eliminate this sensation connecting the ground terminal with an
external ground.
1.
Use the screw-type ground terminal to connect to ground
or to connect to the chassis of the mixer, preamp, or other
device in your system.
CLASSICO L3 REAR SIDE
11