Before You Start To Play; Connecting The Ac Adaptor; Connecting An Usb Memory - Dexibell VIVO S7 PRO Quick Manual

4

Before You Start to Play

Connecting the AC Adaptor

1.
Rotate the [VOLUME] knob toward the left
position to minimize the volume.
2.
Connect the included power cord to the AC
adapter.
The indicator will light once you plug the AC
adaptor into a wall outlet.
To an AC outlet
Power cord
NOTE
• Depending on your area, the included power cord may differ
from the one shown above.
• Be sure to use only the AC adaptor (DEXIBELL DYS602-
240250W) supplied with the unit. Also, make sure the line
voltage at the installation matches the input voltage specified
on the AC adapter body. Other AC adapters may use a different
polarity, or be designed for a different voltage, so their use
could result in damage, malfunction, or electric shock.
• If you won't be using the S7/S3 PRO for an extended period of
time, disconnect the power cord from the electrical outlet.
• To avoid malfunctions, never disconnect the AC/DC adapter
while the instrument is turned on.
3.
Connect the AC adaptor to the S7/S3 PRO's DC IN jack
positioned to the rear bottom panel. Secure it manually
screwing the ring nut to the DC IN socket.
DC IN socket
Plug in the DC IN socket and rotate clockwise the ring nut
VOLUME
AC Adapter

Connecting an USB Memory

(commercially available)
1.
As shown in the illustration, connect an USB Memory to
the MEMORY port.
NOTE
Carefully insert the USB Memory making
sure that the connector on the device is
appropriate and that it is connected in the
proper direction.
NOTE
The S7/S3 PRO supports all USB memory (FAT
32 formatted).
Anyway, because there are so many USB
memory on the market and it is almost
impossible to check all types of memories, it
could happen that a memory is not compatible
with your instrument.
Safely Remove the USB Memory
IMPORTANT
You should always safely eject the USB Memory before
physically unplugging it from USB socket. Before to unplug the
USB Memory use the "USB REMOVE" function.
1.
Press the [MENU/EXIT] button.
2.
Use the [] [] buttons to scroll the list and select the
"USB REMOVE" function .
3.
Press the [ ] buttons to access the function.

The display shows:
1.
Press the "YES" Function button to safely remove the USB
Memory.
Now you can unplug the USB Memory safely.
9