Ovislink OVT-12 Quick Instruction

OvisLink Call Center Headset Training Adapter
*** This training adapter is designed for OvisLink Call Center headsets and may not
be compatible with other headset brands. Prior to using the OVT-12 adapter please
make sure your OvisLink headset is compatible with your phone's brand and model.
Package Includes:
Call Center Training Adapter
The configuration for the training adapter is different depending on which
telephone brand and model is in use. See below scenarios for reference.
Scenario 1: The telephone has RJ9 headset jack. The OvisLink headset that
works with the telephone has a YELLOW tape at the RJ9 connector.
1. Set the switch next to the TEL port on the training adapter at position "1".
2. Connect the TEL port to your phone's headset jack (at the back of the phone)
with the short RJ9 cord comes with the training adapter.
Quick Instruction
RJ9 to RJ9 Cord
Page 1 of 3
RJ9 to 2.5mm Male Cord