Page 1
Upload torque wrench records to PC 1 - USB driver installation - Insert the installation CD into CD-ROM or open the folder uploaded from the FACOM.COM internet page - In the «USB driver» directory run the «CP210x_VCP_Win2K_XP_S2K3» application - Follow the instructions during installation Once the installation is complete, an icon on the right side of your screen shows the PORT COM number to use for further communication.
Page 2
INSTRUCTIONS E.306 & E.316 2 - Uploader program installation - In the root directory of CD or uploaded folder, run the «setup.exe». - Follow the instructions during installation At this step, choose Uploader V1.5...
Page 3
INSTRUCTIONS E.306 & E.316 3 - Upload torque wrench records to pc To start the communication between your electronic torque wrench and a computer you need to: Run «UPLOADER» program Connect the communication cable between the PC and torque wrench Upload record data a - Run «UPLOADER»...
Page 4
INSTRUCTIONS E.306 & E.316 c - Upload record data - In Uploader, first select the correct com. port number. Note : if you don’t remember the port com number, you can try each number and validate. When text on «Port Open»...