Table of Contents
Advertisement
Getting Content
About "Wireless Standby"
You can use "Wireless Standby" to avoid unnecessary
battery consumption caused by the wireless feature. If
you do not perform any wireless operations for more
than 10 minutes, the wireless feature automatically
enters standby mode. During the wireless standby
mode, you can receive periodicals while minimizing
battery consumption. To access the Reader Store
again, tap the "Store" tab.
"Wireless Standby" is activated as default setting. You
can activate/deactivate the setting from "Wireless
Standby" in the "Settings" menu (
Note
Accessing the Reader Store from the wireless standby mode
takes more time than accessing when the Reader is
connected to the wireless network.
To turn off the wireless feature manually
Turn off the wireless feature when you are in a location
in which radio communications are prohibited. To turn
off the wireless feature, slide the WIRELESS switch to
OFF.
page
155).
Continued
35
Advertisement
Table of Contents
