Yamaha Rhino 700 Fi Owner's Manual page 40

To set the clock
1. Set the display to the clock.
2. Push the " /
starts flashing.
3. Set the hours by pushing the "H" button.
4. Set the minutes by pushing the "M" but-
ton.
5. Push the " /
lease it to start the clock.
" button until the clock
" button, and then re-
Voltage display mode
This display shows the battery voltage.
" " appears for 1 second when the volt-
age display mode is first selected, and then
" " appears and the battery voltage is dis-
played.
If the battery voltage is less than 10 volts, "LO"
is displayed, and if the voltage is above 16
volts, "HI" is displayed.
4-9