The default administrator account is admin. The password is the one that was configured during
initializing settings. To keep your account secure, it is recommended to keep your password
securely and change it periodically (but keep it written down somewhere safe).
You can select the protocol type as TCP, UDP, or MULTICAST depending on the networking
structure. The default is TCP.
If you forgot the password, click Forgot Password? to reset the password.
When entering the Live interface for the first time, follow the onscreen instructions "Please install
plugins first!" to install the plugins.
7. Troubleshooting
FAQs and further information
For FAQs and additional instructions of the features of these DVRs and kits please go to
www.Nightwatcher.co.uk/support
Resetting your password
You can reset the password through the QR code or the security questions.
To reset through the QR code, make sure the Enable check box is selected in Main
⚫
Menu > SYSTEM > SECURITY > Password Reset.
To reset through the security questions, make sure the security quesitons is
⚫
configured.
Enter the login interface.
If you have configured unlock pattern, the unlock pattern login interface is
⚫
If you did not configure unlock pattern, the password login interface is
⚫
On the unlock pattern login interface, click Switch User to login; or on the
password login interface, in the User Name list, select other users to login.
A full version Instruction Manual for this product is available online at
NightWatcher.co.UK/Support
displayed. Click Forgot Pattern, the password login interface is displayed.
displayed.
18