Table of Contents
Advertisement
From these you can configure every part of the system, change your password, set camera
resolutions and frame rates, recording schedules, revise account details, open QR codes to scan
etc.
6. Web operations
Connecting to Network
The factory default IP address of the DVR is 192.168.1.108.
The DVR supports monitoring on different browsers such as Safari, fire fox, Google, on Apple and
PC to perform the functions such as multi-channel monitoring, and device parameters
configurations.
Check to make sure the DVR has connected to the network.
Configure the IP address, subnet mask and gateway for the PC and the Device. For details about
network configuration of the Device, see Set-up, Initialization
On your PC, check the network connection of the Device by using "ping ***.***.***.***". Or similar
network connection test. Usually the return value of Time to Live (TTL) is 255.
On your computer, open your internet browser, enter the IP address of the DVR, and then press
Enter key. The Login in dialog box is displayed. See below. Enter the user name and password to
login to the DVR.
DVR initialization is required at the first login.
17
A full version Instruction Manual for this product is available online at
NightWatcher.co.UK/Support
Advertisement
Table of Contents
