Table of Contents
Advertisement
Select the check box of the event type which includes General, MD
(motion detect, video loss, tempering, diagnosis), Alarm (IoT alarms,
Event type
local alarms, alarms from alarm box, IPC external alarms, IPC Offline
alarms), MD&Alarm, Intel (IVS events, face detection), and POS.
Define a period during which the configured recording setting is
active.
Period
Copy
Click Copy to copy the settings to other channels.
Configure the record settings parameters. See the table below.
Define the video recording period by drawing or editing. By default, it is active all the time.
Define the period by drawing.
⚫
1)
2)
3)
A full version Instruction Manual for this product is available online at
NightWatcher.co.UK/Support
Not all models support this function.
⚫
The redundant HDD only back up the recorded videos but
⚫
not snapshots.
The system only activates the alarm in the defined period when
set.
Select the check box of event type. See the picture below.
Define a period. The system supports maximum six periods.
Define for the whole week: Click
, you can define the period for all the days simultaneously.
Define for several days of a week: Click
the icon switches to
simultaneously.
On the timeline, drag to define a period. The Device starts recoding the
selected event type in the defined period. See the picture below.
Table 1-1
next to All, all the icon switches to
before each day one by one,
. You can define the period for the selected days
14
Advertisement
Table of Contents
