Sony SLV-D980P GI Operating Instructions Manual page 45

2
Press V/v to select "VideoPlus," then press
ENTER.
ENTER
The "VideoPlus" menu appears.
3
Press the number buttons to enter the PlusCode
1 2 3
number.
4 5 6
If you make a mistake, press CLEAR and
7 8 9
re-enter the correct number.
0
You can also press B to delete the last entered
number.
CLEAR
ENTER
4
Press ENTER.
The programme position, date, start and stop
ENTER
times, tape speed and PDC (Programme
Delivery Control) setting appear on the TV
screen.
INPUT
SELECT
• If "– –" appears in the "PR" (programme)
column (this may happen for local
broadcasts), you have to set the appropriate programme position
manually.
CLEAR
Press V/v to select the desired programme position. Without setting the
programme position, you cannot select the date, start and stop times, tape
speed and PDC setting.
• To record from other equipment connected to one or more of the LINE
inputs, press INPUT SELECT to display the connected line in the "PR"
position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
Recording TV programmes using the VIDEO Plus+
VideoPlus
Code – – – – – – – – –
Code : 0–9
B
Correct :
SET UP
RETURN
VideoPlus
Code 1 2 3 4 – – – – –
Code : 0–9
B
Correct :
ENTER RETURN SET UP
PR DATE START STOP SPEED PDC
35 SA 19 19 : 00 20 : 00 SP Off
– – – – – – – – : – – – – : – – – – – –
– – – – – – – – : – – – – : – – – – – –
– – – – – – – – : – – – – : – – – – – –
– – – – – – – – : – – – – : – – – – – –
– – – – – – – – : – – – – : – – – – – –
V v B b
SETUP
ENTER CLEAR
continued
® system
45