Changing/disabling programme positions
After setting the channels, you can change
the programme positions as you like. If any
programme positions are unused or contain
unwanted channels, you can disable them.
You can also change the station names. If the
station names are not displayed, you can
enter them manually.
Changing programme
positions
Before you start...
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
Press SET UP, then press V/v to select
SET UP
(OPTION) and press ENTER.
ENTER
2
Press V/v to select "Installation", then press
ENTER.
ENTER
The "INSTALLATION" menu appears.
SET UP
V/v/B/b
ENTER
O RETURN
OPTION
:Français
Langue
L'horloge
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
Messages Ecran
[ Oui ]
V
v
ENTER
RETURN
SET UP
INSTALLATION
Installation Auto
Installation Manuelle
V
v
SET UP
ENTER
RETURN
continued
Presetting channels
21