Searching Using Index Function - Sony SLV-D910B Operating Instructions Manual

Searching using index function

The VCR automatically marks the tape with
an index signal at the point where each
recording begins. Use these signals as
references to find a specific recording.
To find a specific recording by scanning (Index scan)
1
Insert an indexed tape into the tape compartment.
2
Press INDEX, then press m/M. The
INDEX
VCR starts scanning each recording for five
seconds in the corresponding direction.
3
Press H to start playback when you find the desired point.
INDEX
m/M
H
x
INDEX BALAYAGE : B B
continued
Searching using index function
101