Advertisement
Quick Links
®
CliniLever
Healthcare Tapware
PRODUCT CODES:
- TCWTJ150PC
- TCWTJ80PC
SPECIFICATIONS
−
The Galvin Specialised CliniLever
hospitals, aged care facilities, schools and in-home care.
−
®
CliniLever
products provide state of the art features to comply with the latest healthcare guidelines.
−
The dual levers for on/off, hot and cold temperature have a straight forward operation which simplifies
hand washing.
−
Our highly sought after lever handle design can easily be operated with wrists or elbows.
−
The main body is made of solid dezincification resistant (DR) brass rod, with a DR brass fixed outlet.
−
Quick action SBA's include brass jumper valve / ceramic cartridge components, with red and blue
indicator buttons on 80mm lever action handles.
IMPORTANT: All CliniLever
premises in good working order.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice.
PRE-INSTALLATION
MOUNTING DETAILS
Wall body
− Wall body must be G5/8" FI and body should be between
0 and 13mm behind the finished wall surface.
TOOLS REQUIRED
−
Spanner and hex key
−
Thread tape
®
product range is primarily used for hand washing applications in
®
healthcare taps are tested in accordance with AS/NZS 3718 and leave our
G5/8 BSP- Male
N/A
Jumper Valve
Min
50
Max
500
Min
5
Max
85
N/A
Chrome
Advertisement
Related Manuals for Galvin Specialised CliniLever TCWTJ150PC
Summary of Contents for Galvin Specialised CliniLever TCWTJ150PC
- Page 1 Working Temperature (°C) Nominal Flow Rate (LPM) Finish Chrome NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice. PRE-INSTALLATION MOUNTING DETAILS Wall body − Wall body must be G5/8” FI and body should be between 0 and 13mm behind the finished wall surface.
- Page 2 INSTALLATION IMPORTANT: Galvin Specialised products must be installed in accordance with these installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply conditions must also comply to the applicable national and/or state standards. Failing to comply with these provisions shall void the product warranty and may affect the performance of the product.
- Page 3 TROUBLESHOOTING PROBLEM CAUSE RECTIFICATION Taps are dripping water Jumper valves are worn or damaged Replace jumper valve Tap seat is damaged Refurbish tap seat using a reseating tool. Water is leaking from spindle O-ring on jumper valve spindle is Replace o-ring damaged or worn Water is not flowing from tap Water is turned off...
- Page 4 Version 1, 3 November 2016, Page 4 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty.
Need help?
Do you have a question about the CliniLever TCWTJ150PC and is the answer not in the manual?
Questions and answers