Table of Contents
Advertisement
SECTTON 2
Oaeration
commodate a jumper. By moving the guard jumpers to
these locations, the matrix card guard paths will connect
to tbe low backplane terminals of the Model 707.
ice personnel who are familiar with standard
safety precautions.
WARNING
CAUTION
Internal
modifications
to the matrix card
Solder operations require that the pc-board
should only be performed by qualified stxv-
be cleaned as explained in paragraph 4.2.
G
ROW0
H
0 H
L To three-pole
Model 7076
general pllrpose
ROWE ;
;
backplane
of
Model 707
figure 2-14.
Schematic
Drawing of BackplaneJumper Configuration (Factory Default)
2-16
Advertisement
Table of Contents
