Opticon CRD-13 Quick Start Manual

CRD-13
• The CRD-13 is a designated charging and communication cradle for the H-13.
• Read this quick start guide carefully before installing and/or using this product.
• Keep this quick start guide for future reference and store it in a safe place.
• This quick start guide may be revised or withdrawn at any time without prior notice.
• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or
converted to any electronic or machine readable form without prior written consent of Opticon.
• Trademarks used are property of their respective owners.
• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or
indirect damages howsoever caused.
1. Handling Instructions
• Do not attempt to disassemble, modify or update this device.
• Do not use this device near combustible materials.
• Use only the AC adapter specified for this product.
• Do not drop this product or put heavy items on this product.
• Keep the device out of the reach of small children.
• Do not damage the AC adapter or power cable by bending, twisting, pulling, or heating. Do not use
them if they are seriously damaged.
• Do not store this device in an extremely cold or hot environment.
• Do not touch the AC adapter or power cable while your hands are wet.
• Do not insert foreign substances into the device.
• Do not charge the battery in temperatures less than 0 deg. C or greater than 40 deg. C.
• Keep the IrDA communication window clean to avoid communication problems.
• When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild
detergent.
• Do not use this product in the following areas:
- In areas exposed to direct sunlight for long periods of time.
- Near water or other liquids, or in extremely high humidity.
- Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat.
What s in the Box
ʼ
■
Confirm that you have the following items before getting started:
No.
Cradle
1
AC/DC Adapter
2
RS-232C Cable
3
USB Cable
4
Quick Start Guide
5
* The number of accessories may differ depending on the product specification.
Please contact the nearest dealer if accessories are damaged or missing.
Cautions and Warnings
Before Getting Started
Item
Designated charging and communication cradle for the H-13.
Designated AC/DC adapter with a replaceable plug for the CRD-13.
Designated RS-232C cable for the CRD-13.
Designated USB cable for the CRD-13.
Provides product information and instruction guide.
©
Copyright 2008 OPTO ELECTRONICS CO., LTD. All rights reserved.
Introduction
Notice
Quick Start Guide
( Please refer to the specification manual for details.)
Function