Step 3: Connecting The Audio Cords - Sony RDR-HXD560 Operating Instructions Manual

Step 3: Connecting the Audio Cords

Select one of the following patterns, A or B, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver). This will enable you to listen to sound.
[Speakers]
Rear (L)
Front (L)
Centre
: Signal flow
* The yellow plug is used for video signals (page 13).
A Digital audio input jack
If your AV amplifier (receiver) has a Dolby
*2
Digital, DTS , or MPEG audio decoder and
a digital input jack, use this connection. You
can enjoy Dolby Digital (5.1ch), DTS
(5.1ch), and MPEG audio (5.1ch) surround
effects.
AV amplifier (receiver)
with a decoder
to DIGITAL OUT (COAXIAL)
to LINE 2 OUT (R-AUDIO-L)
Audio/video cord
(not supplied)
(white)
(red)
(yellow)*
B Audio L/R (left/right) input jacks
*1
This connection will use your TV's or stereo
amplifier's (receiver's) two speakers for
sound.
[Speakers]
to coaxial digital input
Coaxial digital cord (not supplied)
DVD recorder
(yellow)
(white)
(red)
A
Rear (R)
Front (R)
Subwoofer
B
INPUT
VIDEO
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
,continued
15