Changing programme positions
of the recorder using the
remote
You can change programme positions of the
recorder using the number buttons.
Number
buttons
Example: for channel 50
Press "5," "0," then press ENTER.
z Hint
If the aerial cables are connected to both DIGITAL
AERIAL IN and ANALOG AERIAL IN jacks, you
can switch between digital mode and analogue
mode using the INPUT button.
26
Step 6: Easy Setup
Make the basic adjustments by following the
on-screen instructions in "Easy Setup."
Be careful not to disconnect the cables or exit
the "Easy Setup" function during this
procedure.
INPUT
ENTER
O RETURN
1
Turn on the recorder and your TV.
Then switch the input selector on your
TV so that the signal from the recorder
appears on your TV screen.
The "Language" display appears.
• If the "Language" display does not
2
Select a language for the on-screen
displays using </M/m/,, and press
ENTER.
The initial settings message appears.
3
Select "Start" using M/m, and press
ENTER.
Follow the on-screen instructions to
make the following settings.
EXIT/
appear, select "Easy Setup" in the
"Basic" setup from "Initial Setup" in
the System Menu (page 130).
[/1
GUIDE
</M/m/,,
ENTER
TV [/1