Recorder - Sony RDR-HXD1070 Operating Instructions Manual

Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
Manufacturer
Sony
Grundig
Hitachi
ITT/Nokia
JVC
Loewe
Nokia
Panasonic
Philips
Saba
Samsung
Sanyo
Sharp
Telefunken
Thomson
Toshiba
The remote performs the following:
Buttons Operations
TV [/1
Turns your TV on or
off.
TV 2 (volume)
Adjusts the volume
+/– of your TV.
TV PROG +/– Selects the
programme position
on your TV.
TV t (input
Switches your TV's
select) input source.
To operate the TV/DVD button
(for SCART connections only)
The TV/DVD button switches between TV
mode and DVD mode. Press the TV/DVD
button when in stop mode or no menu appears
Code number
on the TV screen. Point your remote at the
01 (default)
recorder when using this button.
TV mode: switch to this when you use the
11
TV's tuner mainly. When you start playback,
24
the input source for the TV is set to the
recorder automatically.
15, 16
DVD mode: switch to this when you use the
33
recorder's tuner mainly.
45
To check the current mode, press DISPLAY
(page 40).
69, 73
17, 49
06, 07, 08, 72
12, 13, 74
22, 23, 71
25
If the supplied remote interferes with your
other Sony DVD recorder or player, set the
29
command mode number for this recorder and
36
the supplied remote to one that differs from
43, 75
the other Sony DVD recorder or player after
you have completed "Step 6: Easy Setup."
38
The default command mode setting for this
recorder and the supplied remote is DVD3.
You can check the current Command Mode
in the front panel display. For details, see
page 149.
If you have a Sony DVD player
or more than one Sony DVD

recorder

The default command mode setting for this
recorder and the supplied remote is DVD3.
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
25
,continued