Recording From Connected Equipment; Recording From Connected Equipment With A Timer (Synchro Rec) - Sony RDR-HXD1065 Operating Instructions Manual

Recording from
Connected Equipment
+ - RW
HDD RW
VR
- R - R
VR
Video
HDD
z REC
x REC
STOP
Recording from connected
equipment with a timer
(Synchro Rec)
You can set the recorder to automatically
record programmes from connected
equipment that has a timer function (such as
a satellite tuner). Connect the equipment to
the LINE 3/DECODER jack of the recorder
(page 30).
When the connected equipment turns on, the
recorder starts recording a programme from
the LINE 3/DECODER jack.
1
Before recording, select HDD or DVD.
If you select DVD, insert a recordable
DVD (see "1. Inserting a Disc" on
page 35).
2
Set "Synchro Rec." to "Record to
HDD" or "Record to DVD" in the
"Recording" setup (page 146).
- RW +
R
Video
DVD
INPUT
SELECT
</M/m/,,
ENTER
OPTIONS
REC MODE
c z
SYNCHRO
REC
3
Press INPUT SELECT repeatedly to
select "L3."
4
Select the desired audio signal when
recording a bilingual programme to
the HDD or DVD-RWs/DVD-Rs (VR
mode).
Press OPTIONS to select "Line Audio
Input," and press ENTER. Then select
"Bilingual," and press ENTER.
5
Press REC MODE repeatedly to select
the recording mode.
For details about the recording mode, see
page 55.
6
Set the timer on the connected
equipment to the time of the
programme you want to record, and
turn it off.
7
Press c z SYNCHRO REC.
The SYNCHRO REC indicator lights up
on the front panel. The recorder is ready
to start Synchro-Recording.
The recorder automatically starts
recording when it receives an input
signal from the connected equipment.
The recorder stops recording when the
connected equipment turns off.
To stop recording
Press x REC STOP or c z SYNCHRO
REC.
To cancel Synchro Rec
Press c z SYNCHRO REC.
The SYNCHRO REC indicator on the
recorder turns off.
67
,continued