Video Settings (Video) - Sony RDR-HXD1065 Operating Instructions Manual

Sony dvd recorder user manual
Table of Contents

Advertisement

Video Settings (Video)

"Video" settings will adjust items related to
the image, such as size and colour.
Choose the settings according to the type of
TV, tuner, or decoder (Analogue Mode only)
connected to the DVD recorder.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Video," and press ENTER.
The "Video" setup appears with the
following options. The default settings
are underlined.
Example: Digital Mode
Video Output
TV Type
Sets the picture size when playing back a title
recorded from 16:9 size video (page 85) or a
16:9 size commercial DVD video.
Select the playback picture size according to
the type of connected TV (wide-screen/wide
mode TV or conventional 4:3 screen TV).
16 : 9
4:3 Letter
Box
140
Select this when connecting
to a wide-screen TV or TV
with a wide mode function.
Select this when connecting
to a 4:3 screen TV. Displays
a wide picture with bands on
the upper and lower portions
of the screen.
4:3 Pan
Select this when connecting
Scan
to a 4:3 screen TV.
Automatically displays a
wide picture on the entire
screen and cuts off the
portions that do not fit.
16 : 9
4:3 Letter Box
4:3 Pan Scan
b
Note
Depending on the disc, "4:3 Letter Box" may be
selected automatically instead of "4:3 Pan Scan" or
vice versa.
HDMI Resolution
Selects the type of video signals output from
the HDMI OUT jack. When you select
"Auto" (default), the recorder outputs video
signals of the highest resolution acceptable
for your TV. If the picture is not clear, natural
or to your satisfaction, try another option that
suits the disc and your TV/projector, etc. For
details, refer also to the instruction manual
supplied with the TV/projector, etc.
Auto
Normally select this
position.
1920×1080i
Sends 1920×1080i video
signals.
1280×720p
Sends 1280×720p video
signals.
720×480/
Sends 720×480/576p
576p
video signals.
b
Note
Even when a setting other than "Auto" is selected
and the connected TV cannot accept the resolution,
the recorder automatically adjusts the video signals
that are suitable for the TV.

Advertisement

Table of Contents
loading

Table of Contents