Safety With Silk'n Infinity - Silk'n Infinity H3101 User Manual

C Do not treat the same area of skin more
than once per hair removal session.
C Avoid overlapping pulses or gaps when
EN
you treat an area.
Use a lower energy level if you experience
C
mild discomfort.
Do not expose treated areas to the sun,
C
and do not use energy levels 2-5 on tanned
skin or after recent sun exposure (including
artificial tanning machines). Refer to section
"4.5 Exposure to the sun".
C Stop use immediately if you see full redness
of the skin, blistering or burns.
C Stop use immediately if you have any pain.
Stop use immediately if the skin or the
C
device becomes too hot.
2.

Safety with Silk'n Infinity

With Silk'n Infinity safety comes first. Enhanced Home Pulsed Light™ (eHPL)
technology provides superior safety with lower energy levels.
eHPL™ is able to achieve long-term hair removal results at a fraction of the energy
level used in other light-based hair removal equipment. The technology combines
2 energy sources: galvanic energy and optical energy. The galvanic energy enables
better penetration of the optical energy to the hair shaft by temporarily widening
the skin pores. The hair shaft absorbs the light, deactivates the hair follicle and hair
growth is disabled.
The low energy used reduces its potential to cause harm or complications and
contributes to your overall safety.
8