MULTIQUIP Rammax Series Operation Manual page 89

Piston rod
Fig. 13-1 Removal and depressurization of the gas strut
1. Saw cut/hole position:
2. Saw cut/hole position:
NOTE If disposal according to these regulations is not possible, ask your authorized
dealer.
Disposal
RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15) — PAGE 89
/
2. Saw cut drilled hole
Cut or drill into the pressurized tube about 20mm from
the bottom.
Cut or drill into the pressurized tube in the bead.
/
1. Saw cut drilled hole
X
about
Pressurized
tube
DISPOSAL
Bottom
115