Engine Oil; Checking The Engine Oil Level; Location Of Dipstick - MULTIQUIP Rammax Series Operation Manual

3 Screw the filter housing on.
4 Open stop cock (3).
4.1
Filter element Clean water separator element (1) according to the maintenance plan.
clean
1 Close stop cock (3).
1.1
2 Unscrew the filter housing (2).
3 Clean filter element (1).
4 Screw the filter housing (2) on.
5 Open stop cock (3).
5.1
9.8

Engine oil

9.8.1

Checking the engine oil level

1 Check engine oil level daily using the dipstick. The dipstick (1) is located on
Oil dipstick
the left of the engine.
1.1
1.2
2*
Top up engine oil as required.
x
y
Fig. 9-8 Location of dipstick
72
PAGE 52 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15)
Move to ON.
Move to OFF.
Move to ON.
Check oil level while the roller is standing on a level surface and the
engine is cold.
You can see the engine oil level on the dipstick.
The oil level must be between the top (x) and bottom (y) marks.
1
MAINTENANCE
Rammax 1575