Sony RDR-GX380 Operating Instructions Manual page 19

Sony dvd recorder user manual
Hide thumbs Also See for RDR-GX380:
Table of Contents

Advertisement

Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Manufacturer
Sony
Hitachi
JVC
LG/Goldstar
Panasonic
Philips
Samsung
Sharp
Toshiba
The remote performs the following:
Buttons
TV [/1
TV 2 (volume) +/–
TV PROG +/–
TV t (input select)
To operate the TV/DVD button
(for SCART connections only)
The TV/DVD button switches between TV mode
and DVD mode. Press the TV/DVD button when
in stop mode or no menu appears on the TV
screen. Point your remote at the recorder when
using this button.
TV mode: switch to this when you use the TV's
tuner mainly. When you start playback, the input
source for the TV is set to the recorder
automatically.
DVD mode: switch to this when you use the
recorder's tuner mainly.
To check the current mode, press DISPLAY
(page 32).
Code number
01 (default)
24
33
76
17, 49
06, 08, 72
71
29
38
Operations
Turns your TV on or
off.
Adjusts the volume of
your TV.
Selects the programme
position on your TV.
Switches your TV's
input source.
If you have a Sony DVD player or
more than one Sony DVD recorder
If the supplied remote interferes with your other
Sony DVD recorder or player, set the command
mode number for this recorder and the supplied
remote to one that differs from the other Sony
DVD recorder or player after you have completed
"Step 6: Initial Setup."
The default command mode setting for this
recorder and the supplied remote is "3."
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
1
Number
4
buttons
7
</M/m/,,
ENTER
1
Turn off the recorder.
2
Hold down x on the recorder until "codE"
appears on the front panel display.
3
Press PROGRAM +/– on the recorder to
select the command mode (1, 2, or 3).
The selected command mode appears on the
front panel display.
4
Hold down the remote's ENTER and 1, 2,
or 3 of the number buttons corresponding
to the command mode selected in step 3,
for more than three seconds.
x
PROGRAM +/–
2
3
5
6
8
9
0
,continued
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents