Advertisement
Motor
Power
Grinding Wheel
Buffing Wheel
Arbor Size
Base Dimension
Features
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
5.
Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
6.
Use the right tool for the job. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. Do not use a tool for a purpose for which it was not
intended.
SKU 36127
Specifications
ITEM
3600 RPM, 3/4 HP, direct drive
115 VAC at 60 Hz, single phase, 3-prong plug
8 inch diameter x 7/8 inch thick, 36 grit
8 inch diameter x 1 inch thick
3/4 inch
8.4 x 5.9 inches
Safety shield and rests
Save This Manual
Safety Warnings and Precautions
Page 2
DESCRIPTION
Advertisement
