Channel Swapping - Sony AT100 Operating Instructions Manual

Corre- Channel
sponding
Set
channel number
S25 CC28
S26 CC29
S27 CC30
S28 CC31
S29 CC32
S30 CC33
S31 CC34
S32 CC35
S33 CC36
S34 CC37
S35 CC38
S36 CC39
S37 CC40
S38 CC41
S39 CC42
S40 CC43
S41 CC44
AFT
On Turns on the Auto Fine
Tuning function.
Normally select this position.
Off
Allows you to adjust the
picture manually.
• If the Auto Fine Tuning function does not
work effectively, select "Off" and press m
to select "Level." Press </, to obtain a
clearer picture, and press ENTER.
Sound System
Receivable
Select an available TV system (page 120).
Frequency
range (MHz)
B/G
331.25–339.25
339.25–347.25
347.25–355.25
D/K
355.25–363.25
363.25–371.25
I
371.25–379.25
379.25–387.25
L
387.25–395.25
395.25–403.25
Name
Changes or enters a new station name (up to
403.25–411.25
5 characters). The recorder must receive
411.25–419.25
programme position information (e.g.,
419.25–427.25
SMARTLINK information) for station
names to appear automatically.
427.25–435.25
Press ,, then press </, repeatedly to
435.25–443.25
select a character.
To change the characters, press M/m to
443.25–451.25
move the cursor, and press </,.
451.25–459.25
Decoder
459.25–467.25
Sets the external decoder (PAY-TV/Canal
Plus analogue decoder) channels.
For details, see page 33.

Channel Swapping

After the programme positions have been
set, you can change the order of each
programme position in the display list.
1
2
Select this when in West
European countries, except
those listed in "Receivable
channels" on page 120.
Select this when in East
European countries.
Select this when in Great
Britain/Ireland.
Select this when in France.
Press M/m to select the programme
position number you want to swap, and
press ,.
• To display other pages, press ./
> repeatedly.
Press M/m to select the programme
position number to swap for the one
selected in step 1, and press ENTER.
The programme position numbers are
swapped.
• To swap the programme position
number of another station, repeat from
step 1.
121