Playing The Disc On Other Dvd Equipment (Finalise) - Sony AT100 Operating Instructions Manual

6. Playing the Disc on
Other DVD Equipment
(Finalise)
+ - RW - RW
RW
VR
Video
- R
Video
Finalising is necessary when you play discs
recorded with this recorder on other DVD
equipment.
When you finalise a DVD+RW, DVD-RW
(Video mode), DVD+R, or DVD-R (Video
mode), a DVD menu will be automatically
created, which can be displayed on other
DVD equipment.
Before finalising, check the differences
between the disc types in the table below.
Differences between disc types
Discs are automatically finalised
+
RW
when removed from the recorder.
However, you may need to finalise
the disc for certain DVD
equipment, or if the recording time
is short. You can edit or record on
the disc even after finalising.
Finalising is unnecessary when
- RW
VR
playing a disc on VR format
compatible equipment.
Even if your other DVD equipment
is VR format compatible, you may
need to finalise the disc, especially
if the recording time is short. You
can edit or record on the disc even
after finalising.
Finalising is necessary when
- RW
Video
playing on any equipment other
than this recorder.
After finalising, you cannot edit or
record on the disc. If you want to
record on it again, unfinalise
(page 44) or reformat the disc
(page 45). However, if you
reformat the disc, all recorded
contents will be erased.
+ - R
R
VR
Finalising is necessary. The disc
- R
VR
can be played only on equipment
that supports DVD-R in VR mode.
You can edit or record on the disc
even after finalising (except DVD-
R DL in VR mode).
Finalising is necessary when
+
R
playing on any equipment other
- R
than this recorder.
Video
After finalising, you cannot edit or
record on the disc.
SYSTEM
MENU
1
Insert a disc.
See "1. Inserting a Disc" on page 34.
2
Press SYSTEM MENU.
The System Menu appears.
3
Select "Disc Setup," and press
ENTER.
4
Select "Finalise," and press ENTER.
</M/m/,,
ENTER
43
,continued