Solid-state drive
Table 6-5
Spare part description and number
Description
256 GB, SATA-3, TLC
128 GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the optical drive (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
Remove the solid-state drive:
▲
Remove the Phillips M2.0 × 3.0 screw (1), and then pull the solid-state drive module from the socket (2).
Reverse this procedure to install the solid-state drive.
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page
33).
28).
31).
Component replacement procedures
Spare part number
L50020-001
L50019-001
27).
39