Basic Hookups And Settings; Quick Overview - Sony PEGA-VR100K Note: Recording TV programs manually Operating Instructions Manual

Clié® handheld accessories: clié® video recorder

Hide thumbs Also See for PEGA-VR100K Note: Recording TV programs manually:

Table of Contents

Basic Hookups and

Settings

This quick overview will give you enough information to start using the

Video Recorder.

Step 1: Connecting the Antenna Cable (page 13)

Step 2: Connecting to Other Equipment with the Audio/

Step 3: Connecting the AC Power Adapter (page 18)

Step 4: Turning the Video Recorder on and off (page 20)

Step 5: Setting the Clock (page 20)

Step 6: Performing the Setup Using Your CLIÉ

To prepare for recording, use the following the procedures to connect the

antenna, TV, VCR, satellite receiver, and AC power adapter. Then install

Video Utility from the supplied Installation CD-ROM and make initial

settings.

Connecting the VHF/UHF IN jack on the Video Recorder to the

signal source from your wall

Video Cable (page 17)

Connecting other equipment to the Video Recorder (depending

on your equipment)

Connecting the AC power adapter to a wall outlet

Turning on and off the Video Recorder

Setting the clock of the Video Recorder

Handheld (page 21)

Installing Video Utility from the supplied Installation CD-ROM

and setting the tuner and channel

Table of Contents

Clie pega-vr100k