3
Use the supplied antenna cable to connect the splitter's
other output jack to the VHF/UHF IN jack on the Video
Recorder.
When connecting a TV and VCR
Wall
Signal source
Hookup 3: Connecting to a cable box
Use this hookup for a cable box.
1
Use an antenna cable (not supplied) to connect the signal
source coming from your wall to the single (input) jack of the
splitter (not supplied).
2
Use an antenna cable (not supplied) to connect one of the
splitter's two output jacks to the VHF/UHF IN jack on your
TV.
Antenna cable (supplied)
Splitter (not supplied)
Antenna cable
(not supplied)
To VHF/UHF IN
To VHF/UHF IN
Antenna cable (not supplied)
VHF/UHF
IN
For details on the connections above,
refer to the operating instructions of
your VCR or TV.
Video Recorder
VCR
TV
continued
15