Binatone 2300 User Manual page 26

4. Press the DOWN button to select a base number (BASE 1, 2,3 or 4)
5. Press the MENU/OK button to see "PIN ?"
Key in the 4 digit PIN code for the base - the CC2300 default PIN code is 0000
6. Press the MENU/OK button to confirm, and the display will flash
"SEARCHING 1" (or 2,3,4)
7. At the same time, on the base, press the MENU/OK button to see
"PHONEBOOK"
8. Press the UP button tweice to see "REGISTRATION"
9. Press the MENU/OK button to see "SEARCHING" flash on base display
After a short delay, if the registration is successful, there will be a
confirmation beep, and the Handset display will go back to idle mode with
the new handset up a three-way conference number shown (e.g. HS1, HS2). The base display will also go back to
idle mode.
To de-register a handset
You may need to do this if you need to replace a faulty handset. Call the Binatone help
line if you need more advice.
To de-register a handset using the CC2300 base menu
With the base in idle mode:
1. Press the MENU/OK button to see "PHONEBOOK"
2 .Press the DOWN button twice to see "SETTINGS"
3. Press the MENU/OK button to see "DELETE HS"
4. Press the MENU/OK button to see " HS 1 " (or 2,3, 4)
Press UP or DOWN button to select the handset you want to de-register.
5. Press the MENU/OK button to confirm, and the selected handset will be
de-registered. (The display on the handset that has been deleted
will show "UNREGISTERED".)
Press the PHONEBOOK/BACK button to return to the previous menu
*
at any time.
Note: Handsets can also be de-registered using another cordless handset,
as described in the cordless handset user guide.
Binatone Help Line : 0845 345 9677 24