Advertisement
5.1.1.2
Topology
The table below shows the topology and administers the measurement locations assignment of measured data.
Context menu
Report
Show Autoreport log file...: Shows general log file of the Autoreport (start time, when ended...)
Show reports...: Opens a selection dialog containing all reports. the reports are saved to the same older as
the parameter sets.
Default: <Public documents>\ SIEMENS\SICAMQ80\Data\<feeder>\<Parameter set>\<Reportx>.pdf
Show meas. loc. file...: Shows the measurement location's log file.
Switch to analysis: Goes to the
Measurement location
Set as passive: Sets the measurement location to passive, in order that the device / measurement group is
assigned to another measurement location.
Activate: Activates the measurement location, on the condition that it is not already active at another branch.
Delete: Selected entry (entries) and all associated subentries are deleted.
Topology
Save topology: Saves the current topology
Export topology to...: Exports the current topology from an XML file.
Import topology from...: Imports a previously exported topology in XML format.
General
Properties: Properties of the selected topology entry, see
Note
Evaluation
When a device is parameterized, then this always refers to the current entries in the
topology. Thus, in the reports on a measurement location, different reports may be listed!
( e.g. due to exchanging devices, repairs etc.)
Any empty topology always shows the entries Collector \ Station \ Level. These are required
for storing data from unknown measurement locations for Autotransfer and -report purposes.
These entries can not be deleted.
Operation modes and settings
Definition: Creates new topology entries
New Region: Generates a new entry for a region,
see also
here
New Station: Generates a new entry for a station, see
also
here
27
.
New voltage level: Creates a new entry for a voltage
level, see also
New feeder: Generates a new entry for a measurement
location, see also
page .
109
here
26
Power Quality Recorder SICAM Q80 7KG8080, System manual
.
27
here
27
.
here
27
.
E50417-H1076-C420-A2, Release 12.01.2015
25
Advertisement
