Advertisement
4
QuickStart
Brief instructions on starting SICAM Q80 7KG8080 for the first time.
4.1
Installation
Install the software
Connect measurement unit to the communication network
Connect measurement with all measurement leads (observe safety guidelines for dealing with high voltages!)
Switch on measurement unit. If you are commissioning multiple devices, switch on one at a time and assign the
IP-address.
Set IP address with program IF-Config (Start>program files>SICAM Q80 Manager>IF-Config).
o Click on the plus-sign by the network adapter in the left column
o Click on the plus-sign for your device
o Select the LAN branch
o Set the IP-address
Start the SICAM Q80 Manager program
Device selection dialog opens
o Select "New..."
o Select "Network settings..."
o "TCP/IP" must be selected
o Select "Network search"
o Select SICAM Q80 7KG8080
Note
If your device doesn't appear in the list, you must first call "IF-Config" and assign the device a valid
address. (Start Menu/SICAM Q80 7KG8080/IF-Config; rf.
The device selection dialog must be in the right-hand side list
On the page Topology, right-click the mouse over the device
Assistant opens.
(use the toolbar button
Enter a name for a new measurement site
Device is selected
Enter a name for the measurement task
"Task process" the tree diagram on the left side of the interface; according to
the selection made here; the right side displays corresponding options, data or
lists
Prompt for device definition
"Add device interface"-dialog appears
"Settings for network"-dialog appears
Close with "OK"
PC searches network for SICAM Q80 7KG8080 devices
Close with "OK"
or menu item "Parameter-Set / New Ctrl+N")
e.g. "Power Station 1"
e.g. "Test 1"
"OK"
"Configuring the Interface
finish with "OK"
and select
New Parameter Set...
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
QuickStart
17
").
204
22
the
Advertisement
