Radio Presets; Sleep Function - QFX CR-30 User Manual

Press the NEXT / MINUTE button (7) again to stop the SWEEP. You can also press the
NEXT / MINUTE button (7) quickly to select an individual frequency.
5. Press and hold PREV / HOUR button (6) to begin the sequential sweep of all frequency channels
starting form the highest frequency to the lowest frequency.
Press the PREV / HOUR button (6) again to stop the SWEEP. You can also press the PREV / HOUR
button (6) quickly to select an individual frequency.
• TIPS FOR BEST RECEPTION
The AM & FM antennas are built-in to the cabinet of this player. To improve
reception of radio stations simply move the entire player to another location
until reception improves.

RADIO PRESETS

This Alarm Clock can store 10-FM & 10-AM radio stations in the Preset memory. To store
preset stations follow the steps below.
1. Use the NEXT / MINUTE (7) or PREV / HOUR (6) buttons to tune to the desired radio
station.
2. Press & hold the CLOCK / MEMORY button (2) until "P01" flashes on the LED
Display.
3. Use the NEXT / MINUTE (7) or PREV / HOUR (6) buttons to choose which preset
(P01 – P10) you wish to use for the current Radio Station.
4. Press the CLOCK / MEMORY button (2) to set the current Radio Station to the selected
preset shown on the LED Display.
5. Repeat steps 1-4 to set additional presets into the memory.
To tune directly to your Radio Presets simply press the CLOCK / MEMORY button (2)
repeatedly to cycle through the Presets stored in the memory.

SLEEP FUNCTION

This Alarm Clock can be set to play music for a set amount of time (10-60 minutes) and then
automatically turn OFF using the SLEEP Timer.
To turn the SLEEP Timer function ON simply press the SLEEP button (4) and "90" will
show
on the LED Display indicating the music will automatically turn OFF after 90 minutes.
To adjust the amount of time before the music will turn OFF, press the SLEEP button (4)
repeatedly until the correct amount of time (90 – 80 -70 – 60 – 50 – 40 – 30 – 20 – 10
minutes) is shown on the LED Display.
To turn the SLEEP Timer OFF continue pressing the SLEEP button (4) until the LED Display
shows "OFF".