Setting Up On A Pedalboard - Aclam Guitars Dr.Robert Vox UL730 User Manual & Safety Instructions

Setting up on
a pedalboard
All our effect pedals use a custom light aluminum
enclosure specially designed to fit our Smart Track
pedalboards. We incorporated a proprietary locking
system which allows the user to fasten the pedal without
the need of using the typical hook and loop method.
This custom fastening system follows the same
philosophy behind the Smart Track fasteners but
®
integrated in the enclosure reducing the space occupied
by each pedal.
That translates into more pedal density for the same
space, and who doesn't want that?
We strongly recommend you to take a look at our line of
pedalboards, which are the best complement to our pedals!
22
HOW TO MOUNT IT ON A SMART TRACK
®
Add the anti-sliding rubber pad at the bottom of your
1
pedal, specially shaped for this unit.
!
Surface must be clean and dry before applying
adhesive pad.
PEDALBOARD:
®
Loosen the 2 thumb screws to unlock the bottom
2
pieces out of the pedal.
Place the pedal, inserting the bottom pieces inside
3
the grooves.
Move the pedal to its final position.
4
23