Mechanical Installation; Mounting The Connector Box On The Slide - Beckhoff AL225 Series Operating Instructions Manual

6

Mechanical installation

6.1

Mounting the connector box on the slide

Mounting the connector box on the slide!
The motor cables of the linear motors are generally not drag chain-capable. The connector box
must therefore be mounted on the moving part of the linear axis.
Connector boxes AL2250-0000 and AL2250-0001
The connector boxes are mounted with 2 screws (e.g. M4 / DIN13).
Remove the cover (2) of the connector box and insert the screws through the appropriate slot (1).
Connector boxes AL2255-0001 and AL2256-0001
The connector boxes are mounted with 4 screws (e.g. M5 / DIN13).
Insert the screws through the mounting straps (1) of the boxes.
AL225x Connector-Box Version: 1.9
Mechanical installation
17