Sony DVP-NS775V Operating Instructions Manual page 26

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
B-2
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
Coaxial digital cord
(not supplied)
to coaxial or optical digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT jacks.
26
CD/DVD player
COAXIAL OPTICAL FRONT REAR CENTER R-AUDIO-L
L
R LINE OUT
PCM/DTS/
WOOFER
DOLBY DIGITAL
DIGITAL OUT 5.1CH OUTPUT
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
Stereo amplifier (receiver)
VIDEO Y P B P R
S VIDEO
OUT COMPONENT VIDEO OUT
or
Stereo audio cord
(not supplied)
(white)
MD deck/DAT deck
B-1
(red)
R-AUDIO-L
LINE OUT
(white)
to LINE OUT L/R (AUDIO)
(red)
to audio input
. If the amplifier
.
B-2
B-1
VIDEO