Sony DVP-NS76H Operating Instructions Manual page 43

TVS NIGHT
Large sounds, such as explosions, are
suppressed, but quieter sounds are
unaffected. This feature is useful when you
want to hear the dialogue and enjoy the
surround sound effects of "TVS WIDE" at
low volume.
TVS STANDARD
Creates three sets of virtual rear speakers
from the sound of the front speakers (L, R)
without using actual rear speakers (shown
below). Use this setting when you want to use
TVS with 2 separate speakers.
L
L: Front speaker (left)
R: Front speaker (right)
: Virtual speaker
Notes
• When you select one of the TVS modes, turn off
the surround setting of the connected TV or
amplifier (receiver).
• Not all discs will respond to the "TVS NIGHT"
function in the same way.
• When the playing signal does not contain a signal
for the rear speakers, you cannot hear the TVS
effect.
• When you select one of the TVS modes, the
player does not output the sound of centre
speaker.
• Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.
• If you use the DIGITAL OUT (OPTICAL or
COAXIAL)/HDMI OUT jack and set "DOLBY
DIGITAL" to "DOLBY DIGITAL," "MPEG" to
"MPEG," and "DTS" to "ON," in "AUDIO
SETUP", sound will come from your speakers but
it will not have the SURROUND effect.
• The TVS effects do not work when using the Fast
Play or Slow Play functions, even though you can
change the TVS modes.
R
43