Park Brake Removal - Land Pride Accu-Z Razor Z44 Service Manual

Land Pride
SECTION 1: OPERATOR CONTROLS

PARK BRAKE REMOVAL

1. Disconnect battery to prevent accidental shock and
chock wheels for safety.
NOTE: For ease of access seat pan assembly may be
removed.
2. Loosen and remove battery hold-down bracket.
NOTE: For ease of access remove battery and
battery tray.
3. Remove brake return spring from battery hold-down
post and park return link.
photo zsm164
4. Remove hair cotter pin from park linkage rod.
5. Remove park return link, and pull the park linkage rod
from the control pivot shaft.
photo zsm082
6. Remove hair cotter pin, and hardware, from park
return link at rear of unit.
7. Remove park link rod from the park lever shaft
weldment.
photo zsm111
9/24/09 Z44 and Z52 Accu-Z Razor (S/N 472620 and above) Riding Mowers 357-044SM 5