Sony DVP-NS310 Operating Instructions Manual page 26

SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
LINE:
9
Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
Video signals
• VIDEO (page 60)
S video signals
• S VIDEO (page 60)
RGB signals
• RGB (page 60)
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
NO
11
Press X/x to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
then press ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 ( through
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1 C-1
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
B-2 C-2
26
JACKET PICTURE
VIDEO
VIDEO
S VIDEO
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
).
D
D
• Select "DIGITAL OUTPUT." The
Setup Display for "DOLBY DIGITAL"
16:9
appears.
ON
12
Press X/x to select the type of
RGB
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 (
B-2
• D-PCM (page 63)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 63)
13
Press ENTER.
"DTS" is selected.
14
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 (
B-2
• OFF (page 63)
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 63)
through
B D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
through
B D
C-2
D
).
OFF
STANDARD
ON
D-PCM
D-PCM
DOLBY DIGITAL
OFF
STANDARD
ON
D-PCM
PCM
OFF
OFF
ON
).