Resuming Playback From The Point Where You Stopped The Disc (Resume Play/Multi-Disc Resume) - Sony DVP-NS310 Operating Instructions Manual

Resuming Playback from
the Point Where You
Stopped the Disc
Play/Multi-disc Resume)
The player remembers the point where you
stopped the disc.
DVP-NS305
Resuming playback for the
current disc (Resume Play)
The player remembers the point where you
stopped the disc even if the player enters
standby mode by pressing [/1.
1
While playing a disc, press x to stop
playback.
"RESUME" appears on the front panel
display.
2
Press H.
The player starts playback from the point
where you stopped the disc in Step 1.
z Hint
To play from the beginning of the disc, press x
twice, then press H.
32
(Resume
DVP-NS310/405/410
Notes
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
– you open the disc tray (DVP-NS305/NS310
only).
– you disconnect the mains lead.
• When playing a CD, the point where you stopped
is cleared when the disc tray is opened or the
mains lead is disconnected.
• When playing a DATA CD, the point where you
stopped is cleared when the player enters standby
mode, the disc tray is opened, or the mains lead is
disconnected.
• This function may not work with some discs.
Storing the point where you
stopped the disc (Multi-disc
Resume) (DVP-NS405/NS410
only)
The player stores the point where you stopped
the disc and resumes playback from the same
point the next time you insert the same disc.
Resume playback points for up to 6 different
DVD/VIDEO CD discs remain in memory
even if you disconnect the mains lead. When
you store a resume playback point for the
seventh disc, the resume playback point for
the first disc is deleted.
z Hints
• To play from the beginning of the disc, press x
twice, then press H.
• To turn off the Multi-disc Resume function, set
"MULTI-DISC RESUME" in "CUSTOM
SETUP" to "OFF" (page 61). Playback restarts at
the resume point only for the current disc in the
player.
Notes
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
• This function may not work with some discs.