Sony DVP-NS310 Operating Instructions Manual page 57

Controlling other TVs with the
remote (DVP-NS310/NS405/
NS410 only)
You can control the sound level, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer's code.
1
While holding down TV [/1, press the
number buttons to select your TV's
manufacturer's code (see the table
below).
2
Release TV [/1.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Manufacturer Code number
Sony (default) 01
Grundig 11
Hitachi 24
Loewe 06
Panasonic 17, 49
Philips 06
Samsung 06
Sanyo 25
Sharp 29
Thomson 43
Toshiba 38
Notes
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
57