Western TransCube Series Operator's Manual page 2

The TransCube was designed for the transport of diesel fuel - UN 1202 / UN 1993.
It is a double wall Intermediate Bulk Container (IBC).
Regulation size placards must be on all 4 sides of the TransCube or its means of transport.
The TransCube was manufactured to the United
tion) tested and certified as a UN Standard Mobile IBC, 31
ional standard recognized by TDG whether made in USA or imported and DOT's o ce 4 Hazarfous
Materials Safety (USA).
Closures: In transport AL L valves and plugs
closure system nearest the contents of the IBC must be closed fi
lid.
Fill to a maximum of 95% capacit y.
The TransCube must be secured firmly to its means of transport. Do not drill holes in the primary or
secondary tanks.
Replacement of any component must be the same specification or e
be obtained from Western , Toll free: 866-814-247 0, Phone: 203-847-430 0 or Fax: 203-847-431 0.
Compulsory Inspections: The Transport of Dangerous Goods regulations require the IBC to be in
spected every 60 months at a government registered facilit
each test, and kept with the TransCube. The month and year o f the inspection must be stamped in
the space provided on the metal specification plate.
Refer to Operator's Manual for more details.
using the TransCube.
For use on site as a station tank it is UL 142 listed for just storage.
USER'S NOTICE
Nations speci fications (eg. 49 CFR Code of Produc-
AY Packing Group III. This is an internat-
must be closed. Ensure pump is turned o . The
y. The Record Card must be filled out at
The operator must read and understand Manual before
WESTERN GLOBAL INC.
ii
rst. Close and lock the hatch-
quivalent. Replacement parts can
-