Tv Virtual Surround Settings (Tvs) - Sony DVP-NC60P Operating Instructions (DVP-NC60P CD/DVD Player) Operating Instructions Manual

Cd/dvd player
Hide thumbs Also See for DVP-NC60P Operating Instructions (DVP-NC60P CD/DVD Player):
Table of Contents

Advertisement

Checking the audio signal
format
You can check the audio signal format by
pressing AUDIO repeatedly during playback.
The format of the current audio signal (Dolby
Digital, DTS, PCM, etc.) appears as shown
below.
Example:
Dolby Digital 5.1 ch
1 : ENGLISH DOLBY DIGITAL
LFE (Low Frequency
Front (L/R)
Effect)
+ Center
Example:
Dolby Digital 3 ch
2 : SPANISH DOLBY DIGITAL
Front (L/R)
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Center
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound's
monaural rear audio signals.
• LFE (Low Frequency Effect) signal
Note
If "DTS" is set to "OFF" in "AUDIO SETUP"
(page 66) the DTS track selection option will not
appear on the screen even if the disc contains DTS
tracks.
Rear (L/R)
3 / 2 .1
2 / 1
Rear
(Monaural)
TV Virtual Surround
Settings
(TVS)
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
This only works when playing a multichannel
Dolby audio sound track. Furthermore, if the
player is set up to output the signal from the
DIGITAL OUT (OPTICAL or COAXIAL)
jack, the surround effect will be heard only
when "DOLBY DIGITAL" is set to "D-
PCM" in "AUDIO SETUP"(page 65).
1
Press DISPLAY twice during
playback.
The Control Menu appears.
2
Press X/x to select
then press ENTER.
The options for "TVS" appear.
OFF
OFF
DYNAMIC 1
DYNAMIC 2
TVS DYNAMIC THEATER
CINEMA 1
TVS DYNAMIC
TVS WIDE
2
CINEMA
TVS NIGHT
TVS STANDARD
3
Press X/x to select one of the TVS
modes, the press ENTER.
DISPLAY
(TVS),
DVD VIDEO
43
,continued

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-5950dpHt-6900dp

Table of Contents