Sony DVP-NC60P Operating Instructions (DVP-NC60P CD/DVD Player) Operating Instructions Manual page 26

Replacing discs while playing a
disc (EXCHANGE)
You can open the disc tray while playing a
disc so that you can check which discs are to
be played next and replace discs without
interrupting playback of the current disc.
1
Press EXCHANGE.
The disc tray opens and two disc
compartments appear. Even if the player
is playing a disc, it doesn't stop playing.
2
Replace the discs in the
compartments with new ones.
3
Press DISC SKIP.
The disc tray turns and another two disc
compartments appear.
4
Replace the discs in the
compartments with new ones.
5
Press EXCHANGE.
The disc tray closes.
z Hint
While the disc tray is open,
– If the playback of the current disc end, the player
stops playing. If the disc is played in One Disc
Repeat Play mode (page 33), the current disc
starts playing again.
– In Shuffle Play mode (page 32), titles/tracks/
chapters are reshuffled only on the current disc.
– In Program Play mode (page 30), the titles/tracks/
chapters only on the current disc are played.
26
DISC SKIP
EXCHANGE
DISC SKIP
Note
Do not push the disc tray to close in step 5, as you
may damage the player.
Locking the disc tray (Child
Lock)
You can lock the disc tray to prevent children
from opening it.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and "LOCKED" appears
on the front panel display. The
EXCHANGE buttons on the player and the Z
button on the remote do not work while the
Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
Note
Even if you select "RESET" under "SETUP" in the
Control Menu (page 61), the disc tray remains
locked.
and
A