Sony DVP-NC555ES Operating Instructions Manual page 26

: Connecting to the 5.1ch input jacks
D-1
You can enjoy 5.1ch surround sound using
the internal Dolby Digital, DTS, or Super
Audio CD Multi decoder of this player.
: Connecting to a digital jack
D-2
This connection will allow you to use the
Dolby Digital or DTS decoder function of
your AV amplifier (receiver). You are not
able to enjoy the surround sound effects of
this player.
z Hints
• For correct speaker placement, refer to the
instructions of the connected components.
• To enhance the sound performance:
– Use high-performance speakers.
– Use front, rear, and center speakers of the same
size and performance.
– Place the subwoofer between the left and right
front speakers.
• Use connection
more speakers (6.1 ch or more).
Notes
For connection
• After you have completed the connection, be sure
to set "DOLBY DIGITAL" to "DOLBY
DIGITAL" and "DTS" to "DTS" in Quick Setup
(page 27).
• When you connect an amplifier (receiver) that
conforms to the 96kHz sampling frequency, set
"48kHz/96kHz PCM" in "AUDIO SETUP" to
"96kHz/24bit" (page 76).
• Super Audio CD audio signals are not output from
the digital jack.
26
when connecting to 7 or
D-2
D-2